-
KSh1,950.00Automatic Transmission Flush TXF 300
(0)One bottle treats an Automatic Transmission system of up to 8 litres.
Application :
Prior to transmission fluid change.
Add the contents of one bottle to the automatic transmission system.
Let the engine run (with shifting) for 15 minutes to circulate flush.
Drain, flush and refill the transmission fluid from the automatic transmission system following the normal procedure. Always use recommended automatic
transmission fluid when refilling. -
KSh2,300.00PETROL Injector Cleaner REDEX
(0)A highly effective combination of active cleaning and protective agents. Suitable for all petrol injection systems such as K-, KE- and L-Jetronic, etc.
Solves problems with:- Difficult starting
- Irregular idling
- Poor throttle response
- Loss of performance
- Lean gas springs and low exhaust values
- Contaminated injection systems.
Suitable for all petrol injection systems.
Application: A 250 ml container is sufficient for 50 liters of fuel. The preparation works over 2000 km from the application.
The preparation can be mixed with fuel at any time. -
-
KSh1,942.00Engine Flush Plus LIQUI MOLY 8374L
(0)It flushes carefully the engine before oil change for a new one or for a new oil type (e.g. mineral for semi synthetic or different oil brand name).
Features
- Removes all deposits of sludge lacquer and resins;
- Powerful dispersant agents keep flushed particles suspended and prevent their depositing on engine parts till eventual oil change;
- Neutralize harmful impact of old oil remnants on the newly changed oil;
- Totally compatible with modern synthetic, semi synthetic and mineral engine oils;
- Flushed oil system extends engine resource and its power.
Applicable in all gasoline, diesel and LPG engine types.
Application
Warm up and muffle the engine. Fill the flushing through the oil filler neck at the rate of 1 packing for 3-5 liters of engine oil. Start the engine and let it idle for 10-15 minutes. Stop engine, replace engine oil and filter.
